Tuesday morning, the storm was categorized as a Category 4 hurricane, with maximum sustained winds around 150 mph and hurricane-force winds extending up to 30 miles from its center.

“A large area of destructive storm surge, with highest inundations of 10 feet or greater, is expected along a portion of the west-central coast of the Florida Peninsula,” the National Weather Service said Tuesday, calling it “an extremely life-threatening situation.”

Here are the Tuesday 10 am CDT #Hurricane #Milton Key Messages – The latest full advisory is at https://t.co/tW4KeGe9uJ pic.twitter.com/rNlYvXT3XV

— National Hurricane Center (@NHC_Atlantic) October 8, 2024

Tampa International Airport (KTPA) suspended all commercial and cargo operations as of 9 a.m. EST Tuesday. 

“The airport will remain closed to the public until it can assess any damage after the storm,” the airport said in a statement.

The airport’s parking garages were also closed, and officials said it could not be used as a shelter because it is located in the “A” mandatory zone and “will not be staffed to assist others with supplies or assistance, nor will emergency services be able to respond to calls or transport individuals to or from the airport.”

• READ MORE: NASA Postpones Europa Clipper Launch as Hurricane Milton Takes Aim at Cape Canaveral

Airport staff have been scrambling to prepare the airfield to minimize the damage from the storm. The airport is managed by the Hillsborough County Aviation Authority, which is also closing Peter O. Knight (KTPF), Tampa Executive (KVDF), and Plant City (KPCM).

St. Pete-Clearwater International (KPIE) in Pinellas County is also located in a mandatory evacuation zone. The airport said it would close after the last flight departed Tuesday and would remain shuttered Wednesday and Thursday because of the storm.

Hurricane Milton Update – The airport terminal will close after the last flight on Tuesday and remain closed Wednesday and Thursday. The airport is in a mandatory evacuation zone and is not a public shelter. Prepare and stay safe.

— St. Pete-Clearwater International Airport (@iflypie) October 7, 2024

Orlando International Airport (KMCO) said it will stop operations Wednesday at 8 a.m. EST, although, according to a press release from the Greater Orlando Aviation Authority (GOAA), the airport will remain open to emergency/aid and relief flights. The airport is not a shelter, and officials said commercial flights will resume when it is deemed safe to do so pending damage assessment and weather.

Operational Update/4 – Hurricane Milton
On Wednesday, at 8 a.m., commercial operations will cease at our airport. We'll continue to monitor the hurricane's path and we'll post updates as they become available. Please continue to work with your airline in regards to your flight. pic.twitter.com/lM8qaL8s7v

— Orlando International Airport (@MCO) October 7, 2024

At Miami International Airport (KMIA), the largest and busiest airport in the Sunshine State, officials said they were “closely monitoring” the storm and encouraged travelers to check with the airlines to confirm flight status before venturing to the airport.

Sarasota Bradenton International Airport (KSRQ) said it would close at 4 p.m. Tuesday EST, however, many flights had already been canceled.  

The FAA’s full list of  current airport closures may be found here.

SRQ is open until 4pm today and many flights have already been canceled.

We urge you to check with your airline directly to confirm if your flight is operating.

The airport will be closed tomorrow, October 9th and Thursday, October 10th.

#FlySRQ pic.twitter.com/B2x1NDFegK

— SRQ Airport (@SRQAirport) October 8, 2024

Milton is also impacting recreational flying. In Lakeland, Florida, the Flightoberfest festivities scheduled for Saturday on the Sun ’n Fun campus have been postponed, per a statement on the website.

“Our primary concern is the safety of our staff and guests,” event organizers said. The event has been rescheduled for November 16. 

The post Hurricane Milton Triggers Florida Airport Closures appeared first on FLYING Magazine.

Elixir co-founder, CMO, and COO Cyril Champenois delivered the update at a press briefing in which he confirmed the company’s engineering origins, and its proactive timeline starting in 2015. “At that time, we created the company with 50,000 euros,” said Champenois. “After seven years we are now almost 100 employees in the company, and we are growing fast. After two years to conceive the design for the Elixir, three years to certify it, and seven years [total] to deliver the first aircraft, we are now reaching 70 firm orders for our aircraft.”

“At the moment we have 14 jobs open…at the GAMA conference we were discussing the workforce challenges we are facing, and we are struggling to hire.” Though this has been a challenge, Elixir still managed to deliver its first 10 units in 2022, beginning with the first shipment in February 2022.

A Minimum of Parts

The low-wing, two-seater is powered by the 100 hp Rotax 912is, well-suited to the training mission, certified under EASA CS-23 and undergoing FAA validation. It features a simple cockpit in its most cost-effective version, though it’s still capable enough for IFR training. 

What sets the airframe apart is its minimum of parts—the composite structure has been designed from OneShot carbon fiber components, and has no spar, ribs, or stringers. The low parts count not only helps achieve manufacturing efficiencies but also drives a lower operating cost, as little as $37/hour. Robust landing gear also serves well for student laps around the pattern. A BRS ballistic parachute recovery system comes standard.

Elixir plans another model, powered by the 140 hp Rotax 915 series, and targeted to private buyers on an IFR mission. It will feature a full glass cockpit as well.

Sales to Mermoz Academy

Elixir announced it has just signed an agreement with Mermoz Academy, one of the largest aviation training organizations in France, for a total of 6 aircraft. Mermoz’ Stephane Meyer was on hand to confirm the arrangement, which builds on the success it has had selling the company’s first model to flight schools on both sides of the Atlantic Ocean.

“We are demonstrating that we are able to attract big, professional [academies] to our aircraft,” said Champenois. “Big challenges faced by the flight school are solved by this new generation of aircraft, especially regarding fuel consumption and the operating cost and the environmental impact.”

Those orders add to ones posted by early U.S. partner Cirrus Aviation in Sarasota, Florida, which has a total of 10 aircraft on order, to be delivered over the course of 5 years. Cirrus has also been instrumental in another element of Elixir’s planned growth: a U.S. facility for assembly of kits imported from the company’s main base in La Rochelle, France. 

“Knowing that the market is mainly in the U.S., we are already working on the opening of facilities in Florida, where we will assemble kits that will be shipped from France and be reassembled there. As you know, 60 to 70 percent of the market is in the U.S. and we have to be there.”

Champenois also alluded to upcoming financing that will help secure the company’s needed expansion at the La Rochelle-Île-de-Ré Airport (LFBH).

The post Elixir Aircraft Signs Mermoz Academy Order, Plans Sarasota Assembly in Florida appeared first on FLYING Magazine.