The New Owner Archives - FLYING Magazine https://cms.flyingmag.com/tag/the-new-owner/ The world's most widely read aviation magazine Wed, 09 Oct 2024 15:59:12 +0000 en-US hourly 1 https://wordpress.org/?v=6.6.1 Seeing Your Aircraft Through the Lens of Odd Mods https://www.flyingmag.com/the-new-owner/seeing-your-aircraft-through-the-lens-of-odd-mods/ Wed, 09 Oct 2024 15:59:09 +0000 https://www.flyingmag.com/?p=219201&preview=1 A Cessna 170 owner goes on a quest to find the most unusual FAA-approved modifications for his airplane. Here are the top five.

The post Seeing Your Aircraft Through the Lens of Odd Mods appeared first on FLYING Magazine.

]]>
As any airplane owner quickly learns, most types can be modified to some extent through STCs, or supplemental type certificates. From higher-quality sun visors to additional fuel tanks to entirely different engines, an owner can customize their airplane to their liking—provided someone designed that modification, tested it thoroughly, and got it approved by the FAA. 

Predictably, less common aircraft types tend to have fewer STCs to choose from. More popular types, however, might have several hundred that have been developed and offered over the years, particularly if the type was produced for a long period of time. 

Curious about what STCs have been approved for my Cessna 170B since the type was introduced in 1952, I moseyed over to the FAA’s somewhat clunky STC database. There, I typed in “170B” in the model/series field and was presented with 377 results.

Fortunately, the list was downloadable, and I went to work sorting and exploring them to find the most unusual STCs of all.

Tricycle-Gear Conversion


Before the 172 took off in the market, Met-Co-Aire attempted to capitalize on the hot new tricycle gear craze that was sweeping the nation at the time. [Courtesy: FLYING, November 1955]

The predecessor to the massively successful Cessna 172 Skyhawk was a taildragger that was nearly identical—the Cessna 170. But before Cessna introduced their tricycle-gear 172, a company called Met-Co-Aire spotted the untapped market and introduced a tricycle-gear conversion for the 170.

The end result was a Cessna 170 with tall, ungainly tricycle gear. The awkward look came from repurposing the existing main gear legs, simply moving them backward to continue their main gear duties in a different location. The tall gear legs necessitated a correspondingly tall nose gear, and the result is the aesthetic abomination seen here. 

If it’s an abomination in terms of aesthetics, it’s doubly so in spirit. Gone is the elegant stance of the classic taildragger, and gone is the visual connection to aviation’s golden age. In their place comes increased stability on the ground and additional capability in crosswinds. 

It’s unclear exactly how many Cessna 170s were converted in such a manner. What is clear is that all—or almost all—examples have since been converted back to their proper, original configurations. 

Aftermarket Windshield Wiper

The 100-series Cessna windshield wiper STC is so rare that North Korean dictator Kim Jong Un appears to be the only aircraft owner still interested in the feature. Here, he pilots a wildly modified Cessna with poor-fitting wipers and unusual leading-edge devices—neither of which are known to comply with any existing STC. [Courtesy: Korean Central Television]

I have mixed feelings about this one. I want to hate it, and I want to ridicule it. But if I’m being completely honest, I do very much hate when my vision and focus suffer as I’m peering through a rain-covered windshield.

In 1961, a company called American Concorde Systems figured others would share this opinion. Accordingly, it spent the time and money necessary to have its aftermarket windshield wiper approved for over a dozen Cessna and Beechcraft types, including the 170 series. But to date, I can’t recall ever seeing such an installation in the wild on any of them.

It’s probably for good reason. Faced with the annoyance of water droplets on the windshield, I suspect a healthy treatment of Rain-X would solve 80 percent of the problem with none of the weight, complexity, or cost of installing an aftermarket wiper system. And if the system performs anything like its automotive counterparts, smeared bug guts would instantly create a near-total lack of forward vision.

But you’ve gotta love the creativity that drove such efforts in those days.

Cessna 170-Series Medevac Stretcher

While certainly useful for medevac purposes, this stretcher mod is unfortunately well outside the budget of most airplane campers. [Courtesy: AvFab]

When I discovered the AvFab “Cessna Stretcher” approved for installation in four-place 100-series Cessnas, as well as the 205, 206, 207, and 210, disaster relief and humanitarian aid efforts were the furthest thing from my mind. Instead, I immediately envisioned the ultimate Oshkosh camping solution.

Designed to replace the front passenger seat entirely, with the pillow area resting atop the rear bench seat, this stretcher is intended for the transport of individuals in need of medical treatment. But when I look at it, I see a solution that would eliminate the need for tents, cots, and sleeping pads at EAA AirVenture—a solution that would keep you high and dry no matter how strong the Wisconsin thunderstorms might be on any given year.

Alas, a closer look and a request for a price quote revealed disappointing news—the stretcher sells for a stupefying $8,794. Clearly, this item was priced with American medical insurance in mind. Not private aircraft owners. With that nine grand stuffed into my savings account, I think I’ll sleep just fine with my current tent setup.

Burglar Alarm System

The early 1990s were a wild time. Vanilla Ice was topping the charts, The Arsenio Hall Show was in full swing, and car audio installers were raking in cash from the installation of Alpine car stereos, Cerwin-Vega speakers, car phones, and car alarms. Equipped with such luxuries, all that was left was to lean back and look cool in your Ford Mustang 5.0.

GA aircraft largely escaped Vanilla Ice and 10-inch woofers—but not alarms. In 1991, a company called Thompson Aero Security secured an STC for a dedicated aircraft burglar alarm. Details are scarce, but the STC is mentioned in discussions and documents spanning a wide variety of aircraft types, from Cessnas to Citabrias to Swifts to Seabees. 

Do I have any need for such an alarm system? Despite the investment I’ve got in my beautiful Garmin panel, I can’t imagine the wailing of a random obnoxious alarm would send many bystanders running to foil such a property theft crime. But then again, it would be pretty funny to walk toward a buddy on the ramp after parking, pull out a small keyring fob, press a button, and be rewarded with the chirp-chirp from my plane’s alarm system behind me.

‘Wings with Springs’

Close-ups of the air/oil pull-shocks utilized in the ‘Wings with Springs’ airplane wing suspension system. [Courtesy: Wings with Springs]

This one is downright insane. In the 1950s, a man named Earl Metzler devised a suspension system for aircraft wings. Marketing it as a gust alleviation system that provided a smoother ride, increased stability, easier “steep and quick turns,” and slower landings, he called his system “Wings with Springs” and, in 1964, was awarded an STC for Cessna 170 through 182 models.

The design frightens me. The wing spar is modified to incorporate hinges at the wing roots and oil-damped nitrogen-filled cylinders to the base of each wing strut. Sitting stationary on the ground, a visible droop is apparent, with each wing sagging noticeably. A company brochure states that, in flight, the “wing tip will elevate to three and one-half feet above the level position.”

Apparently, the system did indeed provide some measure of comfort in bumpy air. Nevertheless, not enough airplane owners were convinced that the benefit was worth adding additional parts, complexity, and potential points of failure to their wings, and by all accounts, only a handful of systems were sold and installed.

Today, there’s no evidence of any Wings with Springs systems remaining installed or in active use. But at least one Cessna 170B retains the STC approval despite being returned to its standard factory design…and the STC is still active on the FAA’s registry.

This means that the current STC holder could, in theory, resume production and sales of this crazy modification.

The post Seeing Your Aircraft Through the Lens of Odd Mods appeared first on FLYING Magazine.

]]>
The Interplay of Upgrades https://www.flyingmag.com/the-new-owner/the-interplay-of-upgrades/ Wed, 25 Sep 2024 15:23:48 +0000 https://www.flyingmag.com/?p=218375&preview=1 When fine-tuning your aircraft, it's important to understand how one modification might unexpectedly affect another.

The post The Interplay of Upgrades appeared first on FLYING Magazine.

]]>
From the very beginning, I’ve had a thing for testing and evaluating vehicles and gadgets.

Beginning with bicycles and radio-controlled cars in grade school, I’d pore through various magazines and create elaborate custom builds on paper with meticulous detail. I would typically conduct these exercises during class because, frankly, mitochondria and the Louisiana Purchase simply couldn’t compete with CODA Magic cranksets and Novak electronic speed controllers.  

Later, after serving several sentences of detention for my inattention in class—during which I continued my builds—I moved on to motorcycles. Before long, I had acquired a BMW R1150GS Adventure and had outfitted it as a formidable overland touring motorcycle. I rode that bike around Lake Superior three times and even from Wisconsin to Maine and back before graduating to the pinnacle of expensive, motorized hobbies: aircraft ownership.

The progression has been rewarding, and I’ve learned that airplanes are even more satisfying to learn, modify, evaluate, and master than land-based machines.

General aviation airplanes provide an intriguing balance of new technology and historical design. I also appreciate how, like bicycles, most airplanes are simple enough for even minor changes and modifications to be readily apparent to the user. Change a set of control arms on a two-ton BMW packed to the gills with electronic wizardry and tomblike cabin insulation, and you might not even notice the change. But installing some tiny vortex generators or 10 pounds of tail ballast in many airplanes will completely transform the flying experience. 

As I’ve been modifying my Cessna 170 over the past few years, I’ve enjoyed evaluating each upgrade and change individually. Thus far, the McCauley seaplane propeller, Alaskan Bushwheels, and Garmin panel have been the most impressive. But it’s particularly interesting to evaluate and understand the interplay between these changes—how one modification might unexpectedly affect another.

The most striking example of this involves my Garmin GI 275 EIS engine monitor and the aforementioned McCauley seaplane propeller. Both are outstanding upgrades, but now, having flown with both for over a year, I would never want to install the prop without the engine monitor.

The concern, I’ve come to learn, involves cylinder head temperatures (CHTs). I had an expensive and unfortunate lesson in CHT monitoring on my first lesson in my airplane. The incident resulted in an unexpected top overhaul of my engine and gave me an appreciation for the value of a good engine monitor. 

The flatter-pitch seaplane prop introduces huge capability and performance gains for a relatively small investment but also demands careful monitoring of CHTs during climbs. Because the engine turns so much faster during takeoff and climb, the engine becomes hotter. This is exacerbated by the correspondingly lower speeds in climb and cruise. 

The difference was eye-opening. On warm summer days, if I simply select maximum throttle for takeoff and keep it there up to cruise altitudes as I did with the standard prop, it’s quite easy to exceed 425 degrees CHT. Had I kept the old digital gauge that displayed just one cylinder—

and did so down on the lower section of the panel—it’s questionable how evident this would be.

The GI 275 EIS, on the other hand, displays each cylinder’s information in bright, crisp color, making it clear and easy to understand, even at a quick glance. Just as importantly, it’s mounted up high on the panel, bringing the information front and center. Positioned here, trends are instantly evident—and particularly when colors change from green to yellow or from yellow to red, they don’t go unnoticed.

Armed with such comprehensive, real-time information about the state of each individual cylinder, I’ve adjusted my flying accordingly. No longer do I simply set the throttle and leave it there for the duration of the climb. Instead, I massage my climb rate and throttle setting to keep my CHTs below 400 degrees.

This requires some concerted effort. It feels odd to reduce power at 1,000 feet agl, and it feels even more odd to momentarily level off at 1,500 feet agl to build airspeed and keep the cylinders cool. But any annoyance is quickly erased by the satisfaction of knowing that the engine is happy and properly cared for.

I love my seaplane prop and unwaveringly recommend it to anyone with a Continental C-145 or O-300 engine. It transforms the thrust and takeoff performance of a 145 hp airplane for a tiny fraction of the cost of an upgraded engine. But it has become clear that the prop alone is an incomplete modification. Without a corresponding engine monitor, pitfalls emerge, and an unsuspecting pilot could learn some lessons the hard way.

So there you have it. Evidence that one fun upgrade can easily justify another. And evidence that a grade-schooler’s time spent poring over their favorite hobbyist magazines during class can pay off later in life. 

The post The Interplay of Upgrades appeared first on FLYING Magazine.

]]>
Unannounced Landings and the Need for Bail Money https://www.flyingmag.com/unannounced-landings-and-the-need-for-bail-money/ Wed, 11 Sep 2024 14:00:00 +0000 https://www.flyingmag.com/?p=217505&preview=1 It’s not that I didn’t have permission to land at the private grass strip. It’s that the person who granted me permission to land there wasn’t technically the owner.

The post Unannounced Landings and the Need for Bail Money appeared first on FLYING Magazine.

]]>
Bail money isn’t something that I typically include on my before-landing checklist. Of all the variables with which one might have to contend upon landing at a new airport, incarceration generally isn’t one of them.

But on a late-afternoon flight through the Wisconsin countryside last week, it did cross my mind.

It’s not that I didn’t have permission to land at the private grass strip. It’s that Shane, the person who granted me permission to land there, wasn’t technically the owner. And while I was somewhat confident his permission was sufficient, I knew it probably wouldn’t hold up in court.

I first met Shane at a fundraising event hosted by the Wisconsin Aviation Hall of Fame, a nonprofit dedicated to collecting and preserving the state’s aviation history. They were unveiling a new collection of 34,000 historic photographs being put on public display. These never-before-seen images are a true treasure trove, and I’ll be featuring some of the more notable finds in future installments of History’s Unique Aircraft.

Shane and I started chatting, and I learned that he is the president of the local Experimental Aircraft Association (EAA) chapter. We began discussing some of the lesser-known private airfields in the area. I mentioned how I’d always wanted to fly into one particularly nice-looking one east of Madison called Der Schwarzwald Airport (5WI3) but hadn’t yet reached out to the owner to ask for permission. 

Turning to face me directly, Shane then bowed his head and ceremoniously touched the edge of his hand to each of my shoulders, one after the other. “I hereby anoint you an officially approved visitor to Der Schwarzwald,” he said. As it turned out, he was friends with one of the owners of the airfield, and I was now welcome to drop in anytime.

I thanked him and repeated the ritual for him, granting permission to visit my private home airfield anytime. With the formalities, such as they were, out of the way, we continued our chat about exploring the area and enjoyed the rest of the event before parting ways and heading home. 

A few weeks later, on a picture-perfect Sunday with ample sun and not even the slightest puff of wind, I decided to go check out Der Schwarzwald for the first time. It occurred to me that I could, out of an abundance of caution, give Steve a call to confirm I still had permission to do so. It also occurred to me that I could look up the registered owner of the airfield on airnav.com and check in with them, as well.

But it was a beautiful afternoon, and I didn’t want to spend it on the phone. 

Before long, I was trundling over to the airfield, throttled back to around 90 mph with the windows open and enjoying one of the last looks at Wisconsin’s lush greenery. In only a matter of weeks, the crops would be cut down, and the carpet of emerald foliage would explode into fiery autumn colors.

No matter how pleasant the weather might always be in places like San Diego, the ever-present anticipation of the changing environment and emerging seasons around the Great Lakes might be even more enviable. 

As I approached the unfamiliar airfield, I got down to business. Shane said there were no unique characteristics or hazards with which one should be concerned, only mentioning an incline on one end of the runway. Still, I was on high alert, watching for any radio towers as well as for any traffic. There was, after all, no published common traffic advisory frequency (CTAF) to use, and folks in those parts often flew airplanes without electrical systems, radios, or ADS-B. 

I overflew the field and entered a left downwind for Runway 4, making a note of the completely limp windsock. When I was abeam my touchdown point, I spotted three individuals walking around one of the hangars at the end of the runway. An early, straight-tail 172 sat outside of the hangar. 

When they stopped walking and peered upward, shielding their eyes to get a better look at me, I wondered whether Shane had passed on the news of my invite. And just like the discomfort one might sense when walking uninvited up someone’s driveway and into their backyard, I began to feel like an unwelcome intruder. With any luck, I thought, they’d be friendly, and bail money wouldn’t be necessary at all.

I reduced my throttle to just above idle, making a fairly short, constant turn from downwind to final. Thanks to the 170B’s 40-degree flap setting, it’s fairly easy to do so in a stable manner while allowing the airspeed to bleed down to the 60 mph short-field approach speed recommended by the book. 

Rolling out on short final, I saw what Shane was talking about when he referred to the incline. Sure enough, the first 500 feet of Runway 4 was, from my perspective, a rather steep uphill grade. This had the effect of making the rest of the runway a plateau, and I quickly added power, readjusting my aiming point to a position beyond the crest of the hill. 

With close to 3,000 feet to play with, it was no big deal at all, and the lack of wind helped me to execute a wheel landing that made it appear as though I knew what I was doing. Taxiing back to the hangar, the individuals I had spotted from the air were there waiting.

Fortunately, they were all smiles. And unarmed.

As it turned out, one of them was someone I had once met. His name was Al, and in addition to being one of the owners of the airfield, he was also the owner of an extraordinarily rare airplane, a Wing Derringer. Back in 2015, I spotted it on a flight tracking website, stalked him via the FAA database, and cold-called him to ask permission to photograph it. He happily agreed to meet for a photo shoot at the large regional airport in the area, and after using the shots for a History’s Unique Aircraft article, I sent him a few prints as thanks.

Al and his companions were just as welcoming as can be. They promptly provided me with a tour of the hangar and also of Al’s office, where one of my Derringer prints was proudly on display. His office walls were decorated in his own painted art, recollecting his time spent maintaining F-105 Thunderchiefs for the Air Force. The big windows offered a panoramic view of the runway. The place was idyllic—a little slice of heaven, peaceful, utterly silent, and smelling of freshly cut grass.

It was an enjoyable visit spent reminiscing about airplanes, friends, and events from the past. Al and the others spun tales from the airfield’s history, recalling how one of them used to keep a Mooney in one of the hangars and how they used to host formal get-togethers more frequently back then. They also provided some valuable local lore, like how the odd mechanical turbulence that results from easterly winds can create some concerning moments during takeoff for the unsuspecting pilot.

With the sun sinking ever lower on the horizon, I signaled the beginning of my departure with the standard, Upper-Midwestern, “Well, I suppose…” The residents reassured me that I was always welcome to stop by. A few minutes later, as I climbed out after takeoff, a glance downward revealed a flurry of enthusiastic, full-arm waves from alongside the runway, bidding me goodbye.

No complaints. No scolding. And certainly no bail money. It was about as good as an unannounced landing at someone’s private airfield could be.

The post Unannounced Landings and the Need for Bail Money appeared first on FLYING Magazine.

]]>
Life Lessons and Surviving a Fight With Sheet Metal Screws https://www.flyingmag.com/the-new-owner/life-lessons-and-surviving-a-fight-with-sheet-metal-screws/ Wed, 28 Aug 2024 15:46:16 +0000 https://www.flyingmag.com/?p=214237&preview=1 On a day when mechanical frustrations mounted, one of the single greatest features of an airplane turned out to be its former owner.

The post Life Lessons and Surviving a Fight With Sheet Metal Screws appeared first on FLYING Magazine.

]]>
We all become angry and lose our tempers from time to time. Whether stemming from lost keys, an irritating coworker, or a loud neighbor, frustrations like these are simply a fact of life.

And while I have, over the years, become adept at coping with such challenges like an adult, the exasperation I recently felt when fighting the sheet metal screws that secure my engine cowling in place on an otherwise beautiful day truly tested me.

It’s not that the engine cowling is complicated. On the contrary, it’s simply two very lightweight aluminum shells that fasten to the airplane with an assortment of various screws. To remove the cowling, one simply unscrews each of them, and each half can then be gently lifted away from the airplane. To reinstall the cowling, the process is reversed. Should be no big deal.

When hobbled by a near-complete lack of mechanical ability, however, things become a bit more complex. 

It’s my own fault. Growing up, my focus was on the piles of books and magazines that littered my room, and any opportunity to patiently focus on learning basic mechanical skills outside or in the garage tended to be quickly tossed aside in favor of more time reading FLYING or Car and Driver magazines.

Accordingly, my mechanical ability became—and remains—somewhat stunted. 

On the day in question, I was attempting to reinstall the engine cowling, and those sheet metal screws were fighting me every step of the way. Some weren’t long enough for the threads to take hold. Others spun in place, refusing to tighten like the threads were stripped. Still others seemingly hit a stop after a few turns, stubbornly refusing to tighten at all.

It was infuriating, and I was getting to the point where I would have to surrender altogether and beg my mechanic to come save the day.

That’s when I remembered one of the single greatest features of my airplane—the friendly, seven-day-a-week support and knowledge hotline, otherwise known as Dick, the airplane’s former owner.

Dick and I keep in touch pretty regularly. Having purchased the airplane from his friend some 40 years ago, he has over half a century of familiarity with it. When the time came to hang things up and sell it to me, I could tell it was difficult for him to say goodbye to his trusty friend. 

To help ease the pain, I promised to give him a call from time to time to update him on things. Since then, we’ve talked every couple of months. Our chats typically last an hour or more, the seesaw of conversation tipping back and forth between his experiences with the airplane in the past and my learning curve in the present. 

Despite having sold it to me, he continues to harbor a deep sense of ownership for the 170.

Once, when I mentioned that the engine had developed a small oil leak, his reaction was one of shock and deep offense. He could hardly believe that the engine he had taken care of so well had the audacity to misbehave in such a manner, and he wanted answers. Fortunately, fixing the leak was a simple matter of replacing a crush washer, and all was well.

Time and time again, Dick has demonstrated how he’s a walking encyclopedia of 1953 Cessna 170B, serial number 26053.

Right-side fuel drain acting up? Ah, yes, he recalled, he replaced that one back in ’85, so it’s probably due. Brake rotors looking kind of thin? Well, even though he’s only really ever used them to help steer on the ground, they’ve been on there since the Carter administration.

So when the profanity subsided during the Engine Cowl Screw Incident of Summer 2024, I caught my breath, wiped the sweat from my brow, and decided to call my lifeline for help. It didn’t take long for Dick’s friendly, easy-going manner to bring me back down to earth.

And as usual, he managed to explain things in a way that made me feel smarter than I am.

First, he had me spread all the screws out in a big container. Then, he began to point some things out. See how there are a few screws that are shorter in length? Those go up front by the left intake to better clear the forward left valve cover where there’s virtually no clearance. 

Oh, yeah. I guess those must have been the ones that weren’t biting or tightening down in other places. 

Notice how the thread pitch is slightly different on a handful of them? Back in 1983, he converted the forward sheet metal screws and Tinnermans to machine screws and floating nut plates. This provides a more secure attachment up at the front of the cowl for safety.

Oh, yeah—those threads are indeed a little different. That would explain why I was unable to thread so many of them into place. 

Dick methodically and clearly educated me on these finer points of the airplane, effectively talking me down from the ledge of incompetence and helping me to understand yet another mechanical aspect that had, up until that point, completely eluded me.

We chatted for a while longer, talking about flying, sharing some laughs, and updating each other on the latest happenings in our lives. 

It occurs to me that among all the criteria one must consider when evaluating various airplanes to purchase, the friendship and support from a previous owner is one factor that is completely unaccounted for.

Classified ads don’t include the previous owner’s demeanor or friendliness. There’s no way to evaluate whether that person would be willing to help out with information or advice in the future or, indeed, whether they are even the kind of person with whom you’d like to stay in touch at all. 

Perhaps it’s for the best. Because if such an evaluation system were in place and widely used, Dick would have increased the value of my airplane to a level well beyond my financial capability—and I’d never have been able to buy it to begin with.

The post Life Lessons and Surviving a Fight With Sheet Metal Screws appeared first on FLYING Magazine.

]]>
When Unforeseen Circumstances Threaten to Derail Amazing Experiences https://www.flyingmag.com/the-new-owner/when-unforeseen-circumstances-threaten-to-derail-amazing-experiences/ Wed, 17 Jul 2024 14:51:50 +0000 /?p=211560 During Oshkosh month, the severity of aircraft mechanical problems increases exponentially as the date of the magnificent fly-in nears.

The post When Unforeseen Circumstances Threaten to Derail Amazing Experiences appeared first on FLYING Magazine.

]]>
In September 2021, just a couple of months after taking delivery of my 1953 Cessna 170B, I wrote the first installment of this column. Since then, I’ve brought you along for the ride, showcasing the magnificent highs and the soul-crushing lows that have come to define airplane ownership for this first-timer.

This is the 100th installment of The New Owner, and I suppose it’s only natural that the milestone is occurring amid a maniacal blend of emotions swirling around said ownership.

On one hand, EAA AirVenture in Oshkosh, Wisconsin, is next week (July 22-28), so there’s massive excitement for epic times just ahead. On the other hand, some maintenance issues have arisen over the past couple of weeks that create severe trepidation and directly threaten those amazing times.

It’s a perfect representation of aircraft ownership as a whole. Amazing experiences put at risk of derailment from unforeseen circumstances, fighting back and forth like so many Hollywood heroes and villains. But instead of the villains threatening the powers of good with swords, guns, and death rays, the threats come in the form of grounded airplanes and massive repair bills.

Frankly, I’d prefer to take my chances with the guns and death rays.

The first sign that something was amiss came several days ago in the form of engine oil. More specifically, a few extra drops on the hangar floor, slightly higher consumption than normal, and a new sheen collecting on the bottom of the engine. It wasn’t that my Continental engine was leaking oil. That’s pretty typical for most old Continentals. It was that mine was quite suddenly leaking in new places, at higher volumes, much differently than normal.

At any other time of year, it would be a simple matter of postponing future flights and booking some time with my mechanic. But this was Oshkosh month, a time when the severity of any mechanical problems increases exponentially as the date of the magnificent fly-in nears. And being that the big event was only a couple of weeks away at this point, panic quickly set in.

I immediately texted my mechanic, Ryan. He’s a great guy who embodies rural Wisconsin friendliness and honesty. He’s the kind of person who will bend over backward to help you and happily provide educational lessons about the tasks he’s performing along the way. He and his brother own and operate Johnson Brothers Flying Service in Lone Rock, Wisconsin, about 40 miles west of Madison.

While I was waiting for his reply, I examined my engine. I couldn’t quite pinpoint the source of the oil, but I suspected my Continental C-145 was experiencing weepy pushrod seals. This is a known issue with the type, as well as with the later version, the O-300.

I’ve always been amused at the engine’s midproduction name change from C-145 to O-300. Continental evidently figured that referring to the engine by the displacement (300 cubic inches) made it sound more powerful and impressive than referring to it by the 145 hp it produces. Marketing 101, I suppose.

Ryan replied that he would try to make it out sometime during the week before my departure to Oshkosh. But because he was so busy, he couldn’t guarantee it. I’d just have to wait and hope. In the meantime, I opted to remove my upper and lower cowls for a closer inspection.

To someone like me with close to zero mechanical aptitude, dismantling your airplane’s upper and lower cowls to reveal an entirely naked engine is simultaneously empowering and intimidating.

In one respect, it makes you feel like you know what you’re doing. Anyone walking past the open hangar door would naturally assume you possess some rudimentary level of knowledge and proficiency. But in another respect, you’re pretty sure you’re fooling nobody.

For the purposes of an engine inspection, however, it worked out just fine, and I was able to trace the leak to the oil temperature probe on the back of the engine accessory case. I forwarded this intel to Ryan.

The next afternoon, I received a text from him. Unbeknownst to me, he made it out to my plane and addressed the leak. I was ecstatic and headed right out to the airport for a shakedown flight prior to my trip up to Oshkosh.

Sure enough, the oil leak appeared to be taken care of. I preflighted the airplane, pulled it out of the hangar, and hopped in—only to discover that the throttle was inexplicably encountering some kind of blockage halfway into its travel.

Thinking that a running engine might somehow solve the problem, I started it up but found that nothing had changed. The throttle knob would only advance about halfway to full throttle before encountering a hard stop.

Now, things were getting serious. It was a Friday evening, less than a week before my planned departure to Oshkosh. Ryan was busy and wouldn’t be able to chat until Sunday or Monday. Desperate not to miss the big event, I gave my friend Dan a call.

“Hey, man, have you sold your Ercoupe yet?” Dan replied that he had not. “And you’re not going to make it to Oshkosh this year, right?” “That’s right,” he replied. “We’ll be in Michigan all week.”

He knew I was angling for something, so I explained.

“I’m dealing with some mechanical issues on the 170, and I’m not sure if it’ll be fixed in time for Oshkosh,” I said. “If it’s not, how about I take the Ercoupe up and hang some of those big ‘for-sale’ signs on the prop so a half million people see it?”

After considering this for a moment, Dan agreed that it would be a win-win sort of situation.

With a backup plan firmly in place, Saturday came and went. On Sunday morning, I received a text from Ryan. He was available to zip out to the hangar and have a look at my throttle issue.

The fix took him all of about five minutes. He explained that he must have inadvertently dislodged part of the throttle cable while inspecting something else during the oil leak work. He assured me it wasn’t likely to occur again and said he’d be entirely comfortable flying it. He also said that because it was his fault, he wouldn’t be charging me for the trip out. I gave him a 100-dollar bill anyway to show my appreciation.

At the time of this writing, I have just about everything packed up. My tent, sleeping bag, cooler, chairs, underwing party lights, and coffee supplies are ready to go. This afternoon, I’ll fly a shakedown flight to check for any errant oil leaks and confirm all is in order. With any luck, I’ll be flying my own plane up to Oshkosh tomorrow and, much as I sincerely appreciate Dan’s offer, hopefully not an Ercoupe.

If you wonderful readers will also be at Oshkosh next week, please come find me. I plan to be somewhere around Row No. 67, right up on the airshow crowd line. I’d like to thank you in person for your readership and support over the past few years and give you a sticker or two.

Just look for the blue 170 with Alaskan Bushwheel tires. Or, depending on how things go, a classy little Ercoupe.

The post When Unforeseen Circumstances Threaten to Derail Amazing Experiences appeared first on FLYING Magazine.

]]>
Airplane Types Unlock AirVenture Locations for Parking, Camping https://www.flyingmag.com/aircraft/airplane-types-unlock-airventure-locations-for-parking-camping/ Wed, 03 Jul 2024 13:21:38 +0000 /?p=210653 So you’re finally an airplane owner. The best place to park and camp at AirVenture in Oshkosh largely depends on what kind you have.

The post Airplane Types Unlock AirVenture Locations for Parking, Camping appeared first on FLYING Magazine.

]]>
My good friend Chris recently bought his first airplane. It’s over half a century old and has a wooden airframe covered in fabric. He loves it and has been looking forward to flying it to as many fly-ins and get-togethers as possible. 

As is the case with any first-time airplane owner, he’s pretty excited and has been asking me all kinds of thoughtful questions about the logistics of flying into the biggest aviation celebration in the world, EAA AirVenture in Oshkosh, Wisconsin. One of his first questions pertained to the geography of the July 22-28 event and in what area he should plan to park and camp.

Without hesitation, I recommended that he join a mutual friend and me in the centrally located vintage area. A solid week of knuckleheaded antics with a couple of old friends as our airplanes are parked side by side at Oshkosh is the stuff of dreams. As I looked into it, however, I discovered that his airplane—a beautiful 1973 Bellanca Super Viking—was built just past the 1971 cutoff for the vintage category.

I found this to be frustrating. I know the cutoff has to be made somewhere, but his Super Viking is relatively rare, with a sweet design and old-school craftsmanship. It seems wrong that it’s not permitted in the vintage area while scores of Bonanzas and Mooneys that are barely distinguishable from their 1980s-era counterparts fill the rows there. 

As it turns out, the Experimental Aircraft Association clearly defines not just the vintage category of aircraft but the subcategories as well. Within vintage, they are as follows:

  • Antique: Aircraft manufactured before August 31, 1945
  • Classic: Aircraft manufactured from September 1, 1945, through December 31, 1955
  • Contemporary: Aircraft manufactured from January 1, 1956, through December 31, 1970

Chris, therefore, needed a quick lesson on the lay of the land at AirVenture. And so I presented him with an overview of his options, such as they are.

As his aircraft doesn’t fit into the EAA’s categories of vintage, experimental, or warbird, he will be directed to one of two areas upon landing—the “North 40” or the “South 40.” Located at the far north and far south ends of Wittman Regional Airport (KOSH), respectively, these are the largest areas where most airplane owners park and camp.

They are, however, quite different. And while arriving aircraft are not guaranteed to have a choice of which they’ll be directed toward after landing, pilots can print and display a sign requesting one or the other.

If the incoming traffic flow and the workload of the ground marshallers allow, they’ll direct you to your preferred area. So it’s good to know how they differ. 

Additionally, each area has its own unique vibe, with differences not readily apparent in the Oshkosh Notice and markedly different pros and cons. Here’s how I described them to Chris:

North 40

The North 40 is the area surrounding Runways 9-27 at the north end of the airport.

It’s got a lot going for it. The proximity to businesses and restaurants makes it easy to walk to grab a bite of non-EAA food or pick up some supplies. The latter comes in handy when a severe storm approaches and materials for last-minute hail protection suddenly become needed.

Because parking/camping spots are arranged on both sides of the runway, the views of arriving and departing aircraft are fantastic. One needs only walk to the end of their row to sit and watch all the arrivals and departures. It’s not at all unusual for your morning wake-up call to come in the form of multiple P-51s banking directly overhead as they depart for a dawn patrol formation flight. Few alarms are so sublime.

Amenities abound in the North 40. In addition to a small shower trailer on the north side of 9-27, the south side has two separate shower/restroom buildings. Several rows down, there is also a cafe that serves full meals and a small store for toiletries, snacks, and necessities.

A regular procession of dedicated school buses makes constant loops from the show entrance to the Basler ramp in the northeast corner of the airport. Simply flag down one as needed, settle in among your new friends for the ride, and call out the row number where you’d like to be dropped off. I like to leave a small tip for the driver after reaching my destination.

The biggest downside? The steady noise from Interstate 41 and adjacent roads. While mostly just background noise, it adds something of a rest area vibe to an otherwise magical aviation experience. At night, it’s not uncommon for an errant semitruck, Harley-Davidson, or emergency vehicle to wake you up from an otherwise peaceful slumber.

South 40

If the North 40 is city living, the South 40 is quiet life out in the country.

The very southern end borders a 55 mph county road, but there’s otherwise no automobile traffic noise to speak of at night. It’s a peaceful, relaxing vibe.

While the peaceful tranquility is nice with respect to cars, it’s a bit of a downer when it comes to airplanes. Situated well south of Runway 36-18, there are no great views of the runway and only approaches—not landings—are visible from most rows. The vast majority of the South 40 is well south of the action.

The EAA has done a good job bringing the recently expanded South 40 up to speed with amenities. It still falls short of the North 40, but it now has a small store, and showers are easy to find. In addition, there are now more numerous and more frequent shuttles to and from the main show grounds, making it easier to get back and forth. 

For those regularly frequenting the ultralight strip, the South 40 sits in relatively close proximity. Campers stuck walking back to their airplanes after the legendary STOL demo and Twilight Flight Fest face a walk of only a mile to the most distant row in the South 40. This compares with a walk of nearly three miles to the most distant row of the North 40 and provides strong motivation to catch the last shuttle before being shut down for the night.

Armed with a clearer understanding of his camping options, Chris is now better prepared for his first trip to AirVenture in his first airplane. With any luck, the EAA will gradually expand the cutoff for the vintage category to include his sweet Viking.

Until then, I’m sure he’ll have a blast wherever he ends up.

The post Airplane Types Unlock AirVenture Locations for Parking, Camping appeared first on FLYING Magazine.

]]>
Navigating the Aircraft Ownership Learning Curve Through Type Clubs https://www.flyingmag.com/navigating-the-aircraft-ownership-learning-curve-through-type-clubs/ Wed, 24 Apr 2024 13:15:41 +0000 https://www.flyingmag.com/?p=201247 Joining a like-minded group of aviators is an invaluable resource for shoppers as well as owners.

The post Navigating the Aircraft Ownership Learning Curve Through Type Clubs appeared first on FLYING Magazine.

]]>
While browsing an aviation forum recently, I happened upon a thread in which an airline pilot was considering the purchase of a high-performance piston twin. The model he was considering was fairly maintenance intensive, with complex systems and a $300,000-$500,000 price tag. It would be his first airplane, and he was asking a general audience of pilots and aviation enthusiasts for advice about ownership in general and the specific type in particular.

This is something I see fairly regularly, albeit more commonly in reference to more basic and affordable types. A prospective buyer polls a general audience for specific advice about a major purchase, and the replies are both predictable and suspect. All too common is the warning that parts for anything other than Cessna, Piper, or Beechcraft are impossible to find. While certain aircraft (and engines) do indeed present some difficulty with regard to parts availability, the vast majority are entirely possible to own and operate without too much trouble.

There are far better ways to become informed about a given aircraft type, and my favorite, by far, is type clubs.

For a nominal fee, one can purchase an annual membership to a type club and instantly gain access to a treasure trove of virtually any mass-produced type out there. Good clubs offer online libraries chock full of scanned documents, manuals, diagrams, and literature. Additionally, many club websites are home to online forums with comprehensive prepurchase inspection checklists, airworthiness directive (AD) lists, and firsthand knowledge crowdsourced from current and former owners. Best of all, membership is almost always made available to shoppers who aren’t yet owners, offering an extremely affordable education about a type under consideration. 

As someone who creates spreadsheets and compiles detailed documentation for purchases as minor as a toaster, I joined The International Cessna 170 Association early in my shopping process, years before actually purchasing one. I spent hours soaking up as much info as I could about the type. Of particular note was a pinned thread in its forum that listed approximately 30-40 items to address immediately upon purchasing a 170. The list was detailed, and the reasoning behind each item was provided.

When I finally bought a 170 and dropped it off for its first annual inspection, I presented that list to my mechanic. Before long, he completed approximately a dozen various mods, many of which I’d never have discovered without entering the 170 community. I learned that the parking brake has a history of becoming partially engaged after a rudder pedal is pushed to the stop during crosswind landings or taxiing, and we followed the advice to disconnect it entirely. We proactively replaced the tailwheel leaf springs and old copper oil pressure gauge lines. I also had him perform multiple specific inspections that weren’t called out in any manufacturer materials.

Without question, my $45 annual membership had just paid for itself, and I hadn’t even tapped into any of the scanned documentation. Neither had I posted many of my own questions in the forum or engaged with any of the all-knowing 170 owners and their decades of experience maintaining the type. With such informed and helpful people at my disposal, happy to help tackle problems and lend their expertise, this membership is one that I don’t think twice about renewing.

Type clubs like this are also an excellent source of events. Many hold refresher and currency clinics aimed at sharpening the skills of the owner group as a whole. Some even negotiate special rates with insurance companies for owners who have demonstrated an ongoing effort to undergo recurrent training. And even if a club hasn’t arranged for formal discounts, I’ve spoken with one insurance broker who acts as an owner advocate, presenting underwriters with proof of such training and negotiating lower rates as a result.

Other clubs do an excellent job with social events. At face value, many of them appear to be little more than excuses to devour vast amounts of cheeseburgers and ice cream. But if such temptations are what it takes to motivate owners to preflight their airplanes and get into the air regularly, well, that’s good for airplane and pilot alike.

It’s possible rare types benefit the most from a vibrant, active type club or owner’s association. The Meyers Aircraft Owners Association is a textbook example. With a small fleet size to begin with, airframe parts can occasionally become difficult to source. So when the original factory jigs and tooling were located by a Meyers owner, he purchased everything and stored it all in a secure location for preservation. Due to his efforts, the entire Meyers community will be able to source brand-new airframe parts if and when they are required. 

To determine whether your type has a corresponding club, simply Google your aircraft  along with the words “club” or “association,” and you’ll likely find any that exist. Additionally, the EAA Vintage Aircraft Association maintains an excellent list of type clubs.

Finally, if your time and workload permit, consider getting involved and giving back to your community of owners. Help to organize a fly-out or two during the summer. Contribute some of your newfound knowledge in the forums. And lend a helping hand to others who are navigating the steep learning curve of ownership for the first time. 

The post Navigating the Aircraft Ownership Learning Curve Through Type Clubs appeared first on FLYING Magazine.

]]>
Going to the Birds, And How Not To https://www.flyingmag.com/going-to-the-birds-and-how-not-to/ https://www.flyingmag.com/going-to-the-birds-and-how-not-to/#comments Wed, 10 Apr 2024 14:48:22 +0000 https://www.flyingmag.com/?p=200090 Here's a list of what to look for and what questions to ask when shopping around for a hangar.

The post Going to the Birds, And How Not To appeared first on FLYING Magazine.

]]>
It’s not every day I long to take multiple lives with my bare hands. Or fantasize about setting up lethal booby traps that employ electrical current to deliver swift death to my enemies.

But the other day, when I opened up my engine cowl during a preflight inspection and discovered several pounds of grass, twigs, and debris packed tightly into every nook and cranny of my engine compartment, the local starling population was fortunate they were out of my reach. 

It had been a long week, and for days, I’d been looking forward to the simple pleasure of solitary pattern work at a nearby 1,700-foot grass strip that I love. The runway is rolled so frequently, it’s as smooth as a pool table. After a long, frustrating day of work, an hour or so of landings is a great way to clear my mind and unwind.

On this particular day, however, the birds had ensured my trip to the hangar had the opposite effect. I worked for about 30 minutes with a flashlight, needle nose pliers, and a Shop-Vac to remove the piles and piles of brush and grass from around the engine before finally giving up. I wasn’t convinced I’d be able to remove every last bit of it, and given the fire hazard it presented, I decided I’d let my mechanic remove the cowl and blow it all out thoroughly when he arrived for some unrelated work later in the week.

As I reflected on the day’s ruined flight, two observations occurred to me. First, while the shopping process for a hangar to rent is nowhere near as complex as that of an airplane, one can still benefit from some basic detective work. And second, when given the choice, a nicer hangar is most likely worth the extra investment.

Last summer, I opted to move out of my original hangar and into my current one, reasoning that I preferred to share the two-airplane hangar with my friend Dan, who occupies the other half. While it would be difficult to give him up as a hangar mate, the extremity of the bird infestation now has me reconsidering the move. I simply never took the time to look into the new hangar in depth. A hangar is a hangar, I thought.

Now, with a few years of ownership behind me, I’m able to assemble a list of subtle but important concerns that will dictate my selection of future hangars. The current bird concern tops the list, as so much time can be wasted cleaning off droppings and clearing out nest materials. But I’d also approach existing hangar tenants to determine whether water seeps in through the roof or beneath the walls and whether ice dams trap form during the winter.

I’d also ask about the land immediately around the hangar and find out whether it floods and how well the snow is actually cleared during winter. If the main door is electric, I’d be curious to know what happens in the event of a power outage and whether a small generator or battery pack could be plugged in to get the airplane in or out. After all, a power outage that leaves the door open ahead of a violent storm could be disastrous for both the hangar and the airplane inside.

Cell service would also be a concern. With decent coverage, I’d have good day-to-day connectivity, and I’d be able to use a remote switch to turn my engine preheater on or off from home. Good coverage would also enable the installation of cameras, both for security and to check the runway and ramp conditions before making the drive to the airport. My current location has terrible coverage, and all of these things are challenges.

I would never have thought of these things when I first bought my airplane. But now that I know what to look for and what questions to ask, I’d spend some time hanging out at potential airports a bit and learning about their hangar situations before deciding on any particular location. And if faced with a nicer hangar option that comes at a premium cost, I’ll consider how much time and effort I’ve had to spend dealing with the various woes of a bad hangar and account for that in my decision-making process.

As for my current bird situation, I’ve got a plan. The airfield has recently been sold to a new owner. He’s not a pilot, just an enthusiast looking to get into aviation as a hobby. And it sounds like he has yet to go up for a flight with anyone.

There’s an old saying: “A good lawyer knows the law, and a great lawyer knows the judge.” Perhaps a nice evening flight among the hayfields will kick off a good working relationship with the new guy. With any luck, it just might culminate in some weatherstripping, deterrent spikes, and maybe a cat or two to address the bird problem.

The post Going to the Birds, And How Not To appeared first on FLYING Magazine.

]]>
https://www.flyingmag.com/going-to-the-birds-and-how-not-to/feed/ 1
The Pros and Cons of Aircraft Towing Solutions https://www.flyingmag.com/the-pros-and-cons-of-aircraft-towing-solutions/ Wed, 28 Feb 2024 21:55:11 +0000 https://www.flyingmag.com/?p=196635 There are plenty of options, but each has its advantages and disadvantages.

The post The Pros and Cons of Aircraft Towing Solutions appeared first on FLYING Magazine.

]]>
Ask any aircraft mechanic what the cheapest part of an airplane is, and more often than not, their answer will be “the owner.” While mostly true, what I find fascinating is our inconsistency. Tens of thousands of dollars worth of avionics upgrades and performance mods? Sign us up! Fifty-dollar ramp fees and fuel that’s 30 cents more per gallon than usual? You’ve got to be kidding.

It’s a bizarre set of standards we live by that usually defies logic. In my case, I can’t wrap my mind around spending more than about $500 to $1,000 on a tug to pull my airplane into and out of the hangar. I just can’t. 

I know it makes perfect sense to invest in a high-quality, long-term solution to an ever-present problem. “Buy once, cry once,” as they say. But I just can’t bring myself to spend the money on one, and I spent considerable time and effort finding a workable solution for my first airplane.

Here, then, I present a brief overview of towing options for the new aircraft owner.

Towbar

By far the cheapest option to shepherd your airplane into a hangar, the simple towbar is unbeatable in cost but falls short in most other areas. [Jason McDowell]

Pros:

  • Cheap
  • Simple
  • Zero maintenance

Cons:

  • Provides steering assistance only—no power assist
  • Not a solution for heavy aircraft or slick ground surfaces

This is what most aircraft owners start out with. Ranging from flimsy, lightweight, collapsable ones that can easily stow in a baggage compartment to large, beefy versions that enable you to put your weight into it, towbars rely on human power…and human traction. The latter, I have come to learn, is a key concern in the Northern states. 

Attempting to move a fully fueled airplane up a slight grade into or out of a hangar with snow on the ground is often a futile effort. So, too, is stopping an already moving airplane—a somewhat more risky endeavor with potentially disastrous results. For owners of lightweight Ercoupes and 150s, a basic towbar will usually suffice, but for everyone else, the benefits of powered options quickly become apparent.

Stationary Winch

Installing a winch onto the floor or rear wall of your hangar requires some fabrication and planning but can serve as an inexpensive alternative to a tug. [Courtesy: Aircraft Spruce]

Pros:

  • Relatively inexpensive
  • Takes up virtually no space
  • Requires virtually no maintenance

Cons:

  • Provides assistance in one direction only
  • Requires installation into a concrete floor or wall stud
  • Requires remote-control option for tricycle gear aircraft to enable steering with towbar
  • Typically best suited to taildraggers as it can easily apply excessive and improper force to tail tie-down rings

Having never used a winch personally, I rely on the testimony of others. By and large, the people happiest with winch setups are those who have a requirement to pull taildraggers uphill into their hangars. As the tailwheel is the sturdiest point to apply such force, this makes sense. Some owners of tricycle gear aircraft report damage resulting from pulling a tail tie-down ring backward when it was designed to be pulled downward.

Tricycle gear owners are also hindered somewhat by the need to steer the nosewheel at the front of the airplane while controlling the winch in the back. Both corded and wireless winches are available to solve this problem, but this adds expense, eroding the winch’s primary benefit—low cost. For certain owners, a winch setup can provide a tidy solution to a difficult-to-park airplane, but the limitations are significant.

‘Frankentug’

Some online research can uncover old, used tugs for affordable prices, and some elbow grease and manual labor can usually resurrect them. [Jason McDowell]

Pros:

  • Relatively inexpensive

Cons:

  • Maintenance often required to resurrect older examples
  • Abundance of substandard designs
  • Many require proprietary attachments for each aircraft type

“Frankentug” is my own term. After browsing all the shiny new tug options online, I eventually slinked over to Craigslist and Facebook Marketplace to peruse the old, decrepit, used offerings. Many date back to the Ronald Regan administration, with correspondingly Eastern Bloc- and Cold War-era designs. These are the Frankentugs.

Sometimes you get lucky. Sometimes you search for “airplane tug” and are presented with several lightly used options that happen to be all set up for the exact type of aircraft you own. And sometimes these options are offered at sub-$1,000 prices. 

More commonly, however, the offerings resemble a living museum of backyard shade-tree engineering. Some are battery-powered, others plug directly into the wall, and still others are gas powered. The gas-powered examples will invariably require a thorough carb cleaning, and the battery-powered options will often require fresh batteries.

When I located my own Frankentug, I felt fortunate to find a plug-in electric version made by Powertow. Sure, the wiring up toward the handles was frayed and presented a shock hazard. And, sure, the tire was flat. But at $275, the price was right, and upon spotting the listing, I promptly hopped in the car and drove an hour to purchase it.

Unbeknownst to me, the tires on Powertows are horrifically difficult to remove and install. The adjacent gear for the chain drive is positioned so close that tire removal is nearly impossible. Accordingly, in the event of a flat tire, Powertow actually recommends that owners “purchase an entirely new wheel/tire/axle assembly for $170” to solve the problem.

Finding this quite off-putting, I instead begged my local small engine repair shop to replace the tube. Some poor kid was tasked with this and spent hours fighting with it before he was ultimately successful. Feeling bad for him and admiring his perseverance, I tipped him $40.

Next, because my tug was set up for a tricycle-gear aircraft, I had to spend an additional $250 for a tailwheel hookup kit, and then had to drill holes in the tug to install it. This brought my total expenditure to nearly $700. Still ultimately worth it, but just barely. Part of me wishes I had instead put the $700 toward a new, perfect tug.

Garden Tractors

This tractor-turned-tug sports a clever hitch mount that’s spring-loaded in both directions to cushion the force applied to the airplane. [Jason McDowell]

Pros:

  • Plentiful inexpensive options available
  • Good hydrostatic transmissions provide light, precise touch to forward/back motion
  • Can double as snow-removal solution

Cons:

  • Still requires towbar of some kind
  • Some fabrication typically required to connect towbar to tractor
  • Taildraggers require ample hangar space behind airplane to accommodate length of  tractor and towbar

The easiest part of employing the garden tractor solution is sourcing one. Sub-$1,000 tractors are plentiful, and it matters not if the mower deck is missing or broken. Most important is the smoothness and controllability of the transmission engagement so as not to place undue stress upon your airplane.

The most challenging aspect of the tractor option is the method of connection to the airplane. You’ll have to fabricate or source some kind of heavy-duty towbar, and you’ll also likely have to fabricate a means of attaching the towbar to the tractor. This may involve welding a ball hitch bracket onto the frame.

A good towbar is critical, and it perhaps bears mentioning that under no circumstances should an airplane be pulled with a rope or strap. Often, the more demanding job of a tug is to bring the airplane to a stop, and fabric doesn’t work so well under compression.

Best Tugs’ Alpha 2 and Alpha 3

When you’ve had enough of making imperfect solutions work—and when you’re prepared to spend more money—the Best Tug Alpha series is towing perfection. [Courtesy: Best Tugs]

Pros:

  • Literally everything

Cons:

  • Cost

I should preface this section with reassurance that I am in no way sponsored by Best Tugs, nor am I receiving any compensation for my views. Based on my own firsthand experience using its products, the tugs manufactured by the Utah-based company truly do live up to their name.

Best Tugs’ Alpha 2 and Alpha 3 models are powered by onboard batteries and employ actual differentials between their two wheels to provide perfect traction and steering. Power is controlled by a buttery-smooth electronic speed control that enables you to apply torque to the wheels so smoothly and delicately it seems you could clamp a Sharpie marker in the jaws and effortlessly sign your name on the hangar floor.

The only downside? These models cost roughly $3,500 to $4,000. Perfect as they are, that’s an expense I just can’t come to terms with—and I’ve tried. I’ve reasoned that one is simply parking most of the money, as one can expect to recoup at least 50 percent of the cost by selling it in the future. And that a permanent tug solution amounts to roughly the cost of one annual inspection. And that it’s not unlike a one-time insurance premium that makes you less likely to damage a wingtip or tail surface while moving your airplane around.

But nevertheless, the cost looms large. For the time being, I’m mostly content wrestling with my trusty Frankentug, risking electrocution, tripping over the cord, and reminding myself that it’s good to regularly get an upper-body workout to stay healthy and fit.

The post The Pros and Cons of Aircraft Towing Solutions appeared first on FLYING Magazine.

]]>
A Perfect Day for Flying https://www.flyingmag.com/a-perfect-day-for-flying/ Thu, 15 Feb 2024 00:57:57 +0000 https://www.flyingmag.com/?p=195453 Ideal conditions don’t happen often for aircraft owners, so celebrate them when they do.

The post A Perfect Day for Flying appeared first on FLYING Magazine.

]]>
Since purchasing my Cessna 170 two summers ago, the specter of bad luck and I have become very well acquainted. From an idiotic oversight that ruined cylinders (and was entirely my fault) to weeks upon weeks of unflyable weather to winter runway maintenance that commonly appears to have been handled by an insolent helper monkey, it’s fair to say we’ve spent a lot of time together. At times, I suspect this specter maintains a small staff of assistants to ensure the joys of aircraft ownership remain fleeting and special.

But from time to time, I’m welcomed by profoundly good luck. On rare occasions, days off align with fantastic weather, a usable runway, and a properly functioning, squawk-free airplane. On these occasions, I approach my flying with a healthy dose of suspicion and brace myself for the worst, but I make sure to appreciate the good fortune.

Last week, one such day presented itself. After a solid month of fog, low ceilings, and generally dreary weather, the sun reintroduced itself to the upper Midwest, and the people rejoiced. Waving hello to all the other happy citizens of my small town as Zip-a-Dee-Doo-Dah played loudly in my head, I made my way to the small, private airport I call home. While no bluebirds landed on my shoulder, a lone cow regarded me as I passed a nearby farm, and I figured that, given my location in the Wisconsin countryside, that would suffice as a stand-in.

Winds were light and out of the east, neatly aligning themselves to two of my favorite grass strips in the area. While a wispy cloud layer was visible above, low ceilings would not be a factor. And it was even pleasantly warm, setting me up for a relatively pain-free preflight inspection.

Upon arriving at the airport, I saw that the typical poor snow removal did present a few challenges. A couple of Volkswagen-sized dirt mounds littered the east end, and only a narrow strip of the western third had been plowed. Fortunately, I was confident I could successfully negotiate these issues and proceeded with my preflight. 

The preflight was successful in more than one way. I found no mechanical concerns to speak of, and my new technique of packing out any food (namely energy bars) out of the cabin had apparently alleviated the mouse problem I had encountered the previous month. Happily noting that the engine oil level had stabilized perfectly over the preceding eight flight hours, I pronounced the airplane fit to fly.

The engine start and run-up were uneventful, and it was warm enough that I kept the window open for the sheer novelty of doing so in February. I dutifully made my calls on the CTAF as I backtaxied, but the airport and airspace above remained completely serene. Not one airplane was visible, even via ADS-B on my newly overhauled panel. 

While the sun gave the impression of warmth, the air was still crisp and thick, providing a bit more thrust than I’m accustomed to in the summer. Observing the engine stabilize at 2430 rpm early in the takeoff roll, I smiled as my 80/42 seaplane propeller clawed its way through the air and pulled me aloft in less than 400 feet. A quick turn southbound placed me on course for Brodhead, a favorite little airport of mine with three grass runways and a vibrant antique aircraft community.

A mottled landscape of brown and white unfolded beneath me, the remnants of our early January snowstorm receding into the lush soil. Because the state of Wisconsin is unable or unwilling to assign more than a few CTAFs to its airports statewide, a massive variety of unseen voices emerges from my headset. In a 20-mile radius, roughly 11 airports share 122.9, and we step on each other more often than kids forced to learn square dancing in gym class. 

Frustrating as it can be, this comes with a side benefit. As I depart my home field and visit the two other airports on my agenda, I can simply leave my radio tuned to the single frequency the entire time. Because we’re friendly people in the Great Lakes region, position reports are sprinkled with jaunty hellos and inquiries about the day’s plans. This creates additional congestion, sure, but so long as the niceties are kept brief, none of us complain. 

Before long, I entered the pattern at Brodhead. Keeping an eye out for the many radioless antique planes that call the airport home, I ensure every LED light is powered up and continue to dutifully make my position reports. Surprisingly, no other traffic is present, and as tends to be the case when no witnesses are around, I manage to nail each wheel landing, rolling my big Bushwheels onto the grass so lightly I could barely tell when they spun up. 

With the rust of a nonflying January sufficiently cleared off, I departed the pattern and made my way up to Albany, Wisconsin. Relatively short for the area at 1,700 feet, I enjoy challenging myself to take off and land within the first 500 feet of Runway 9— a distance clearly identifiable by the perpendicular perimeter of a neighboring cornfield. As I approached the field, I reminded myself how transients sometimes mix up the name Albany with a nearby town called Albion and listened for both names on the still-busy frequency.

While the continued lack of other traffic and witnesses promised another series of excellent landings, the light breeze decided I could use a bit of a challenge. It shifted around to the north and spilled over an adjacent tree line, randomly changing direction as it saw fit. Riding the swirls and eddies down final, I refocused and had fun trying to predict and anticipate this new variable. Sometimes it worked, and sometimes it didn’t, but while my landings were no longer things of beauty, I enjoyed the atmospheric lesson immensely.

Thoroughly limbered up after a good number of landings and short approaches, I headed back home and was welcomed with the aforementioned narrow strip of runway, bordered by the remnants of lazy snow plowing. It took little effort to properly align myself and set down on centerline, but I was then caught off guard by an errant puff of wind that launched me back up into the air like a hot-air balloon. Carefully maintaining a slightly nose-up deck angle and avoiding a pilot-induced oscillation, a quick shot of power cushioned my return to earth and I settled back down in an ugly yet safe fashion. 

A quick glance to the left revealed the reason for the bobbled landing—another airport tenant was standing nearby, recording me with his cellphone. Where were the cameras down at Brodhead? But my indignation soon subsided to thankfulness as the reality of a perfect day of flying settled in. Days like this don’t occur often enough. So we must soak them up and savor them when they do.

The post A Perfect Day for Flying appeared first on FLYING Magazine.

]]>